Type: 灵活的配电系统 Power-D-Box® 带pcb座子,适用3600/2210/ESX10
描述
紧凑型2U 19英寸配电盒Power-D-Box®带座子,电缆预设在PCB上,铝制支架。支架面板适用多达30个回路。可以配置为6路,12路,18路,24路或30路卡槽,或带冗余的2 x 15路卡槽。
Power-D-Box®适用插拔式断路器3600/ 3900和2210系列,固态远程控制器E-1048-700, 电子式保护器ESX10。所搭配设备必须满足机架的安装深度和底座引脚分配定义。
产品可插入对应的座子63-P10-Si (6 路)。这些座子可以直接焊接在PCB底部,电缆预布。
技术参数
安装方式 | racks |
---|---|
断路器类型 |
electronics hydraulic-magnetic thermal-magnetic |
尺寸 |
height 2U (88.9 mm) installation depth 205 mm installation depth 250 mm width 19 (482.6 mm) |
最大额定电压 |
AC 250 V DC +65 V |
通道数 |
1 x 16 non-redundant 1 x 12 non-redundant 1 x 18 non-redundant 1 x 30 non-redundant 2 x 12 redundant |
适用断路器类型 |
2210 1-pole 2210 2-pole 3600/3900 ESS30 |
供电 |
non-redundant redundant |
供电端子类型 |
M6 Screw terminals Terminal studs (for cable lugs) |
最大负载电流等级 | 16 |
负载接线端子类型 |
2.5 mm² Screw terminals |
信号 |
Break contacts connected in parallel Make contacts connected in series |
辅助触点接线端子类型 | |
工作温度范围 | 0 … +50 °C |
更多技术信息 |
可定制化 |
附件
订货号 | 描述 | |
---|---|---|
X 222 066 01 |
跳线 |
|
Y 308 563 01 |
封板 3600/3900; 2210 |
|
Y 308 563 41 |
封板 ESX10 |
|
Y 308 602 01 |
拆卸工具 |
应用
- Automation
- Chemical, Oil & Gas
- Power Engineering DC 24 V
- Power-D-Box-Systems
- 通信&数据中心技术